Jump to index list
ZORHY 40 User manual Self-propelled flax baling machine
  • A
    • Accelerator pedal[1]
    • Accessories[1]
    • Activating automatic mode[1]
    • AdBlue[1]
      • checking level[1]
      • draining the tank[1]
      • level[1]
      • putting machine back into service[1]
      • removing and draining tank[1]
      • store[1]
      • storing a machine[1]
      • tank[1]
      • temperature[1]
      • topping up[1]
      • type[1]
    • Adjustments[1]
    • Aerator
    • Airco coolant
    • Air conditioning[1]
      • cleaning radiator[1]
      • replacing dry filter[1][2]
      • switching ON[1]
    • Air filter[1]
      • checking[1]
      • checking cabin[1]
      • cleaning[1]
      • cleaning cabin[1]
      • pressure[1]
      • replacing[1]
      • replacing safety filter[1]
    • Alignment
    • Alternator
      • checking operation[1]
    • Ambient temperature[1]
    • Assembly[1]
    • ATEX[1]
    • Attachment
    • Axle load[1]
  • B
    • Bale
      • adjusting the exiting[1]
      • faults[1]
      • reading number[1][2]
      • Resetting number[1]
      • setting desired length[1]
      • setting diameter[1]
      • setting thickness flax layer[1]
      • without rope[1][2]
    • Bale length
      • automatically[1]
      • setting correction method[1]
    • Battery
    • Binding rope system[1][2]
      • adjusting[1]
      • adjusting speed needles[1]
      • calibrating positions needles[1]
      • checking for deformation and wear[1]
      • checking position of knife[1]
      • inserting the rope[1]
      • opening or closing needles[1]
      • replacing a knife[1]
      • replacing fingers[1][2]
      • setting positions needles[1]
      • testing positions needles[1]
    • Binding rope system. See Binding rope system[1]
    • Binding system
      • checking position of finger[1]
    • Blockage
      • looking for and removing cause[1]
      • removing by machine (in the Field mode)[1]
      • removing manually[1]
    • Bolted connection
    • Bottom plate
      • replacing wear plate[1]
    • Brake
      • checking operation[1]
    • Brake pedal[1][2]
    • BRS[1]
    • Burnout
    • Buzzer[1]
      • checking operation[1]
    • Bypassing power limitation[1]
  • C
    • Cabin
    • Camera[1]
    • Catalyser[1]
    • Caution[1]
    • Certificates[1]
    • Chain
      • checking pressure[1]
      • lubricating[1]
      • replacing[1]
    • Chain tensioner
      • (automatically) adjusting[1]
      • adjusting (manually)[1]
    • Charging
      • device, mobile phone[1]
    • Charging circuit
    • Checklist
      • putting into service[1]
      • starting engine after storage during winter[1]
    • Clamping
      • adjusting between mushroom and metal guide[1]
    • Clamp pressure[1]
    • Cleaning[1]
      • air filter[1]
      • cabin[1]
      • engine radiator[1]
      • radiator airco and hydraulic oil[1]
      • using a pressure washer[1]
      • using compressed air[1]
    • Coiled spring
    • Condition
    • Connecting
    • Connecting pin
    • Control[1]
    • Control console[1][2]
    • Controls
    • Control screen[1][2][3]
      • day mode or night mode[1]
      • entering password[1]
      • fault message[1]
      • initial settings[1]
      • overview of the common functions[1]
      • setting date and time[1]
      • setting language[1]
      • setting the brightness[1]
      • setting time[1]
    • Control unit[1]
    • Conveyor belt
      • adjusting tension[1]
      • checking condition and alignment[1]
      • checking tension[1]
      • moving forwards or backwards[1]
      • replacing[1]
      • replacing attachment[1]
      • shortening[1]
    • Coolant[1]
    • Cooling-down phase[1]
    • Correction method
      • automatic bale length[1]
    • Crankshaft
      • checking play[1]
      • lubricating[1]
    • Cutting
  • D
    • Danger[1]
    • Day mode
      • control screen[1]
    • DEF[1]
    • Default setting[1]
    • Description[1]
    • DEUTZ
      • engine faults[1]
    • Device
    • Diagnosis
      • hydraulic pumps[1]
    • Diesel. See Fuel[1]
    • Diesel engine
    • Door[1]
    • DPA[1]
      • final correction / interim correction[1]
    • DPF[1]
    • Drive roller
      • checking the rubber[1]
    • Driver’s seat[1]
      • adjusting See User Manual for the Driver’s Seat[1]
      • presence sensor[1]
    • Driving mode
    • Driving on public roads[1]
      • safety precautions[1]
  • E
    • EAT[1]
      • forcing system[1]
    • EC declaration[1]
    • Electrical cabinet[1]
    • Electrical power
      • switching OFF[1]
    • Electrical system
    • Emergency[1]
    • Emergency exit[1]
    • Emergency hammer[1]
    • Emergency stop button[1]
    • Engine
    • Engine compartment[1]
    • Engine coolant
    • Engine oil[1]
    • Environment[1]
    • Exhaust gas post-treatment system[1]
    • Exiting
      • adjusting bale[1]
    • Exiting profile
  • F
    • Fault
      • creating bale[1]
    • Fault-finding
      • fault messages control screen[1]
    • Fault message
      • control screen[1]
      • deleting[1]
      • deleting history[1]
      • viewing history[1]
    • Faults
    • Feed pressure filter
    • Field
      • placing in Field mode[1]
    • Field mode
      • setting the maximum speed[1]
    • Filter
      • checking air filter[1]
      • cleaning air filter[1]
      • overview[1]
      • replacing air filter[1]
      • replacing safety filter[1]
      • replacing the feed pressure filters[1]
      • replacing the hydraulic suction filter[1]
    • Finger
    • Fire[1][2]
    • Fire extinguisher[1][2]
    • First aid kit[1]
    • Flashing light[1]
    • Flax
      • humidity[1]
      • rolling-up[1]
      • setting thickness layer[1]
    • Fluorescent jacket[1]
    • FMI[1]
    • Formation of bundles[1][2]
    • Forms[1]
    • Front view[1]
    • Front wheel
    • Fuel[1]
    • Fuel tank[1]
    • Fuse
  • G
    • Grease
      • type and alternative[1]
    • Guarantee[1]
    • Guide
      • adjusting (front wheel)[1]
      • check for wear[1]
  • H
    • Hazardous substances[1]
    • Headlight[1]
    • Heating
      • switching ON[1]
    • Height[1]
    • Hose
    • Humidity
    • Humidity limit
    • Humidity meter
      • adjusting display interval[1]
      • deleting memory[1]
      • displaying average[1]
      • saving measurements[1]
      • switching OFF[1]
      • switching ON[1]
    • Humidity of flax[1]
    • Hydraulic component
    • Hydraulic oil[1]
      • analysing[1]
      • checking level[1]
      • cleaning radiator[1]
      • replacing[1]
      • replacing suction filter[1]
      • type[1]
    • Hydraulic pump
    • Hydraulic system
      • checking for leaks[1]
    • Hydraulic tank[1]
  • I
    • Identification[1]
    • Identification plate[1]
    • Important points to note when lubricating[1]
    • Indicator light
      • checking operation[1]
    • Initial settings
      • control screen[1]
    • Input
    • Installation[1]
    • Intended use[1]
  • J
    • Jacking up[1]
      • machine with sprung front wheel[1]
    • Joystick[1][2]
      • checking operation[1]
      • driving mode[1]
      • visual overview[1]
  • K
    • Key[1]
    • Kilometres[1]
    • Knife
      • checking cutting[1]
      • checking position[1]
      • replacing[1]
  • L
    • Ladder[1]
    • Layout
    • Layout of machine[1]
    • Length[1]
    • Liability[1]
    • Light
      • headlights[1]
      • switching ON or switching OFF[1]
      • switching ON or switching OFF the work light on the machine[1]
      • switching ON or switching OFF work light cabin[1]
    • Lights
      • checking operation[1]
    • Loading
    • Loading machine onto lorry[1]
    • Location
      • emergency stop button[1]
    • Lubricant
      • type[1]
      • type and alternative[1]
    • Lubricating
      • chain[1]
      • crankshaft[1]
      • front wheel[1]
      • important points to note[1]
      • pressing chamber[1]
      • spring front wheel[1]
    • Lubricating grease[1]
    • Lubricating schedule[1]
  • M
    • Machine
      • cleaning[1]
      • condition[1]
      • jacking up[1]
      • jacking up (sprung front wheel)[1]
      • reading hours[1]
      • scrapping[1]
      • setting aside after use[1]
      • starting[1]
      • stopping[1]
      • supplied[1]
      • switching OFF safely[1]
      • taking out of service[1]
      • towing with defective engine[1]
      • towing with operational engine[1]
    • Machine data[1]
    • Main phase[1]
    • Maintenance[1]
    • Maintenance schedule
      • authorised service partner[1]
      • maintenance technician[1]
      • operator[1]
      • specialised maintenance technician[1]
    • Manual
      • placing in Manual mode[1]
    • Memory
    • Menu[1]
    • Mirror[1]
    • Mobile phone
    • Mode
      • activating automatic mode[1]
      • changing[1]
      • changing driving mode[1]
      • driving mode Joystick[1]
      • driving mode Pedal[1]
      • loading[1]
      • placing in Field mode[1]
      • placing in Manual mode[1]
      • placing in Road mode[1]
      • setting start driving mode[1]
      • starting rolling-up mode[1]
      • stationary[1]
    • Modules
      • checking power supply[1]
    • Monitor[1]
    • Moving
    • Mudguard
  • N
    • Name
      • parts of machine[1]
    • Needle
      • calibrating positions[1]
      • opening or closing[1]
      • setting positions[1]
      • testing positions[1]
    • Needles
      • adjusting speed[1]
      • viewing position[1]
    • Night mode
    • Noise level[1]
    • Note[1]
    • NSP[1]
  • O
    • Oil[1]
      • analysing the hydraulic oil[1]
      • checking level of hydraulic oil[1]
      • pressure[1]
      • replacing hydraulic oil[1]
      • replacing suction filter hydraulic oil[1]
      • temperature[1]
      • type and alternative[1]
      • type of engine oil[1]
      • type of hydraulic oil[1]
    • Operating speed[1]
    • Operation[1][2]
    • Options[1]
    • Output
    • Overview of the machine[1][2]
  • P
    • Parameter
    • Parking brake
    • Passenger’s seat[1]
    • Password
    • Pedal
      • driving mode[1]
    • Personal protection equipment[1]
    • Pick-up[1]
      • adjusting height[1]
      • raising (via joystick)[1]
      • raising or lowering (via the control screen)[1]
    • Pick-up drum
    • Pictogram[1]
    • Position
    • Power
    • Power limitation
      • temporarily disabling[1]
    • Power supply
      • checking modules[1]
    • Preface[1]
    • Presence sensor driver’s seat[1]
    • Pressing chamber[1]
      • adjusting[1]
      • adjusting manual chain tensioner[1]
      • adjusting the automatic chain tensioner[1]
      • locking or unlocking[1]
      • lubricating[1]
      • opening / closing[1]
    • Pressing chamber belt
      • allowing to rotate forwards[1]
      • checking condition and alignment[1]
      • replacing (corrective)[1]
      • replacing (preventive)[1]
      • replacing connecting pin[1]
    • Pressing chamber door
      • safety valve[1]
    • Pressure
      • adjusting front wheel[1]
      • air filter[1]
      • bale[1]
      • checking tyre pressure[1]
      • checking tyre pressure front wheel[1]
    • Production
      • data of machine[1]
    • Production counter
    • Prohibited use[1]
    • PTO[1]
    • PU[1]
    • Pump
    • Putting into service[1]
      • checklist[1]
      • instructions AdBlue[1]
    • PWM[1]
  • Q
  • R
    • Radiator
    • Regeneration
    • Relative humidity[1]
    • Revs./minute[1]
    • Road
      • placing in Road mode[1]
    • Road mode
      • setting the maximum speed[1]
    • Rolling-up
    • Rolling-up of the flax[1]
    • Rope
      • adjusting clamping[1]
      • inserting into binding rope system[1]
      • inserting into rope tensioning system[1]
      • loading[1]
      • position[1]
    • Rope break
    • Rope cabinet[1]
    • Rope coil
      • loading and connecting[1]
    • Rope guide
      • checking for wear[1]
    • Rope tensioner
    • Rope tensioning system[1]
      • adjusting[1]
      • checking stop for deformation[1]
      • inserting rope[1]
  • S
    • Safety[1]
      • maintenance[1]
      • signs and symbols[1]
      • via the software[1]
    • Safety filter
    • Safety Information Sheet[1]
    • Safety precautions[1]
    • Safety regulations[1]
    • Safety systems
    • Safety valve
      • pressing chamber door[1]
    • SCR[1]
    • Scraper
      • adjusting[1]
      • checking alignment and wear[1]
      • replacing[1]
    • Scrapping[1]
    • Seat
    • Sensor
      • disabling[1]
      • driver’s seat[1]
      • overview[1]
      • replacing[1]
      • testing operation[1]
      • testing pressure chamber sensor[1]
      • testing rope-break sensor[1]
      • testing speed sensors[1]
    • Serial number[1][2]
    • Service life[1]
    • Setting brightness of control screen[1]
    • Setting date on control screen[1]
    • Setting language control screen[1]
    • Setting thickness flax layer[1]
    • Setting time on control screen[1]
    • Side view
    • Signal[1]
    • Signalisation
      • checking operation[1]
    • Sliding door[1]
    • Software
    • Soot filter[1]
      • performing regeneration[1]
      • viewing data[1]
    • Speed
    • Spray-suppression device
    • Spring
    • Sprocket wheel
    • Standstill
      • instructions AdBlue for putting machine back into service[1]
      • regulations AdBlue for storing a machine[1]
    • Standstill-regeneration
    • Starting
      • engine[1]
      • engine does not start[1]
      • machine[1]
      • rolling-up mode[1]
    • Starting rolling-up mode[1]
    • Stationary
    • Steering column[1]
    • Steering wheel
      • adjusting height[1]
    • Stop
      • checking for deformation[1]
    • Stopping
    • Storage[1][2]
      • regulations AdBlue[1]
    • Storage during winter[1]
      • checklist for starting[1]
      • instructions AdBlue for putting machine back into service[1]
      • regulations AdBlue for storing a machine[1]
    • Storing[1]
    • Suction filter
      • replacing the hydraulic suction filter[1]
    • Sunblind
    • Supplied[1]
    • Support[1]
    • Surface area
      • reading number[1]
      • Resetting number[1]
    • Swath
    • Switching OFF
      • switching OFF the machine safely[1]
    • Symbol[1]
      • used in manual[1]
  • T
    • Taking out of service[1]
    • Tank
    • Target group[1]
    • Tension
      • checking conveyor belt[1]
    • Test
    • Tightening torque
    • Time
      • setting on control screen[1]
    • Tip[1]
    • Toolbar[1]
    • Tool cabinet[1]
    • Tooth
    • Top plate
      • mounting[1]
      • replacing wear plate[1]
    • Top view[1]
    • Towing
      • machine with defective engine[1]
      • machine with operational engine[1]
    • Transport[1]
    • Transporting See Moving[1]
    • Troubleshooting[1][2]
    • Tying a knot[1]
    • Tying a square knot[1]
    • Type designation[1]
    • Tyre
      • checking pressure[1]
      • checking tyre pressure front wheel[1]
      • type[1]
    • Tyre pressure
  • U
  • W
    • Warming-up phase[1]
    • Warning[1]
    • Warning signal[1]
    • Warning triangle[1]
    • Water temperature[1]
    • Wear plate
    • Weight
      • maximum permissible[1]
    • Welding[1]
    • Wheel
      • checking the tyre pressure of front wheel[1]
      • checking tyre pressure[1]
      • nuts tightening[1]
    • Width[1]
    • Windscreen washer liquid[1]
    • Windscreen washer reservoir[1]
    • Windscreen wipers[1]
    • Work light
      • switching ON or switching OFF (cabin)[1]
      • switching ON or switching OFF (machine)[1]
    • Workplace
  • Y
    • Year of construction[1]
  • Z